Reasons Why Your Nissan Qashqai Key Fob Won't Work
The Qashqai's greater dimensions give it a distinct SUV-like feel. Its ride on 19-inch alloy wheels in Ti and STL models may also be firm. The front tyres on the Qashqai are also prone to losing grip on rough surfaces and the CVT may occasionally display a wrist-flexing torque steering.
This is usually due to an inoperable coin battery, which is easily replaced in a matter of minutes. Make sure that the replacement battery is of the same voltage, size and specifications.
Water Damage
One of the most frequent reasons a Nissan key fob displays the "key ID is not correct" message is due to water damage. The rubber seals on the key fob guard the chip's electronics, but prolonged exposure to moisture could cause it not to work properly. This is usually the case when you've dropped your key fob into the ocean or in a swimming water pool, but it could happen when it's wet from soapy hands or rain.
If your key fob has been exposed to water for a prolonged period of time, it might need to be cleaned using isopropyl alcohol or an electronic cleaner. It may also need to be sent to an expert for repair or replacement.
If your key fob has to be replaced, it's an easy procedure. First, make sure you have a multipack with the correct battery (CR2032 3V). Then, you can open the front and back cases using a small flathead screwdriver. It is necessary to remove the metal retaining clips and pull out the old battery, and then replace it with the new one. Reassemble nissan key replacement prices and replace the mechanical key. Make sure it's working correctly. If it isn't it is necessary to take it to a local Nissan dealer or an expert auto locksmith to fix the chip in the key. Fortunately, the chip is not often damaged by water exposure and therefore this shouldn't be too expensive.
Dead Coin Battery
The coin battery is a second common reason why your Nissan Qashqai remote key fob may not work. The batteries last for about three to five years, but can become faulty over time if the fob has been dropped often. It is possible to replace the battery with a fresh one, but make sure it's the same voltage and size as the original. If you choose to use a different battery it may cause the key to have an invalid key ID which could prevent it from paired with your vehicle.
The best method to replace the coin battery on the Nissan Qashqai key fob is by removing the key fob using an small screwdriver that has a flat head. The screwdriver should be inserted into a small notch at the bottom of the key fob. Gently twist the screwdriver to break the two halves. Remove the old CR2025 battery and replace it with a brand new one, observing the position of the previous one inside the fob.
Examine the terminals to see if there is water damage or dirt before installing the new battery. If not clean the terminals with the smallest amount of isopropylethanol. You'll also need to ensure that the pole cables are plugged in correctly - they should be connected to the positive and negative poles of the battery.
Diagnostics of a fault
If your Nissan Qashqai's primary fob isn't working after exposure to pure rainwater or clean tap water it could be a sign that there is an issue with the internal chip. You'll require a new fob if you can't solve the issue by replacing the battery. If the key fob didn't work after dropping it, it is likely that the chip inside was damaged. If you clean the chip with isopropyl ethanol and paper towel, then replace it in the key fob, you can generally get it back to working.
Key ID Incorrect is a common error that can be seen on the dashboard of your car. This means that the vehicle is unable to recognize the key fob, and will not allow it to start the engine. This problem could be caused in several ways, such as water damage, malfunctions that are not detectable in the key fob's circuitry or RFID interference.
The key fob will not function in the event that the batteries with 12 volts are dead or fail to provide enough electrical current. This can affect the remote keyless system and central locking in your Nissan Qashqai, as well as hindering you from starting the engine using the key fob (if equipped with Intelligent Key). Examine the batteries on the key fob if you're not able to lock or unlock your door by hand. Try re-inserting the battery to reset the transmitter.
Reprogramming
If the key fob had not been submerged in salt water and is unable to be restored to its original state after a quick wash with clean water. You could also try cleaning the electronic chip using isopropyl ethanol or an electronic cleaner. If these don't work It could be the time to replace the entire key fob with an entirely new one.
If your Nissan Intelligent Key is still not working, it could be a problem with the connection between it and the car. To reconnect it, begin by turning the key in the ignition, without turning on the car. Continue doing this until the hazard lights flash twice. After that, turn the car off and take away the keys.
Then, you need to open the fob compartment of your vehicle. This is usually located in a door jamb on the handle for the driver's door or under the armrest. Find the small button labeled "program" and press it. You will hear a chime after the process has been completed.
It's time to put your Intelligent Key to the test. Use all the buttons on the key while standing at a distance from the vehicle. If the lights flash and the horn beeps it means that the key is successfully linked to the Nissan. You can also test it close to the Nissan.